Tc-electronic TonePrint Editor User Manual download pdf (Page 18)

■

Reverb parameters

TC Electronic TonePrint Editor

■

Manual for software version 1.0 16

Early parameter

Parameter range: -24.5 to 0.0 dB

Use the Early parameter to set the output level of

the “early reflections” part of the reverb algorithm.

■

Increase the Early parameter’s value to em-

phasize the definition of the simulated room.

■

Decrease the Early parameter’s value to set fo-

cus on the diffuse part of the algorithm. When

Early is set to a low value, the reverb effect will

mainly consist of the reverb “tail”.

Reverb parameter

Parameter range: -24.5 to 0 dB

Use the Reverb parameter to set the Output level

of the diffuse field part of the reverb algorithm.

Decrease the Reverb parameter’s value to em-

phasize the early reflections and thereby the defi-

nition of the simulated room.

Dynamix Mode switch

Parameter settings: Off / Positive / Inverse

Dynamix is a unique feature inherited from the

legendary TC 2290 delay. Dynamix allows you to

control the level of the reverb via the dynamics of

the input signal. This creates a very vivid effect

that interacts with your style of playing and choice

of dynamics.

Using the Dynamix Threshold parameter (see be-

low), you can set a “level limit” for your input that

will help control the reverb level in two different

modes – Positive and Inverse.

Off setting

Disables the Dynamix Mode and gives you a reg-

ular Reverb setting as you know it.

Positive mode

When you set the Dynamix Mode switch to Posi-

tive and the level of the input signal exceeds the

Dynamix Threshold limit, the reverb will be damp-

ened. If the input signal falls below the Dynamix

Threshold limit, the reverb will return.

Inverse mode

When you set the Dynamix Mode switch to In-

verse and the level of the input signal exceeds

the Dynamix Threshold limit, the reverb will be

audible. If the input signal falls below the Dyna-

mix Threshold limit, the reverb will be dampened.

Dynamix Threshold parameter

Parameter range: -50 to 0 dB

This parameter is only applicable when Dynamix

Mode is set to Positive or Inverse.

The Dynamix Threshold acts as a “level limit”.

When the threshold is crossed, the reverb will

either appear or dampen in accordance with the

following parameters: Dynamix Mode, Dynamix

Damp, Dynamix Attack and Dynamix Release.

Dynamix Damp parameter

Parameter range: -60 to 0 dB

This parameter is only applicable when Dynamix

Mode is set to Positive or Inverse.

Use the Dynamix Damp parameter to set the at-

tenuation that will be applied to the reverb when

the input signal rises above (Positive mode) or

falls below (Inverse mode) the Dynamix Thresh-

old setting.

Dynamix Attack parameter

Parameter range: 0 to 1.000 s

This parameter is only applicable when Dynamix

Mode is set to Positive or Inverse.

Use the Dynamix Attack parameter to set the at-

tack time (the build-up phase) of the Reverb En-

velope.

Dynamix Release parameter

Parameter range: 0 to 1.000 s

This parameter is only applicable when Dynamix

Mode is set to Positive or Inverse.

Use the Dynamix Release parameter to set the

release time (the decay) of the Reverb Envelope.

The most gated and unnatural effects are ob-

tained using short Release settings. For a typical

eighties-style sound, Dynamix Release should be

set between 0 and 100 ms.

1 2 ... 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Tc-electronic TonePrint Editor User Manual Page 18

Comments to this Manuals

Related products and manuals for Musical Instruments Tc-electronic TonePrint Editor